10W Medical Diode Laser Module 976nm 0.22N.A. With Green Aiming Beam K976D14CA- 10.00W manufacturer from China Diode Laser Module Online Market

10W Medical Diode Laser Module 976nm 0.22N.A. With Green Aiming Beam

Place of Origin:

Beijing, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: K976D14CA- 10.00W

10W Medical Diode Laser Module 976nm 0.22N.A. With Green Aiming Beam 1.FEATURE:&n

10W Medical Diode Laser Module 976nm 0.22N.A. With Green Aiming Beam

1.FEATURE:
    10W output power
     105μm/125μm/250μm fiber
     0.22N.A.
    976nm wavelength
    520nm aiming beam
2.CUSTOMER OPTION:
       Feiber detector
      Constant power control circuit
3.APPLICATION:
    Medical use, Material processing
4.SPECIFICATION:

Specifications(25)		Symbol	Unit	K976D14CA-10.00W
Optical Data	CW-Output Power	P_o	W	10
	Center Wavelength	l_c	nm	976
	Tolerance of l	-	nm	±3,±10
	Spectral Width (FWHM)	l	nm	<3
	Temperature Drift of l	-	nm/	~0.3
Connector Data	Fiber Core Diameter	W_c	µm	200
	Fiber Numerical Aperture	N.A.	-	0.22
	Fiber Connector	-	-	SMA-905
Electrical Data	Operating Current	I_op	A	12.0
	Threshold Current	I_th	A	0.5
	Conversion Efficiency⁽¹⁾	η	%	35~45
	Slope Efficiency	η_D	W/A	0.8~1.0
	Operating Voltage	V_op	V	1.9
	Reverse Voltage	V_re	V	2
PD Data	Current	I_mo	mA	0.20~2.00
TEC Data	Max. Current	I_t	A	6.0
TEC Data	Max. Voltage	V_t	V	9.8
Thermistor Data⁽¹⁾	Thermistor	Rt	(K )/β(25)	10±5%3477
Aiming Beam Data	Output Power	P_a	mW	>2
	Wavelength	I_a	nm	520
	Voltage	V_a	V	7.3
	Current	I_a	mA	<100
Others	Operating Temperature	T_op		10~30
	Storage Temperature	T_st		-20~+70
	Expected Lifetime	MTTF	h	>10,000
	Dimensions (fiber and connector not included)	-	mm	44.5×31.8×18.0
	Lead Soldering Temperature	T_is		260(10 sec.)

(1)R_T=R₀·exp ( β(1/T—1/T₀)), (T₀=25=298K).(2) Optional 5V DC input.
5.OPERATING NOTES:
     1.Avoid eye exposure to direct or scattered radiation.
     2.ESD precautions must be taken.
     3.Please connect pins to wires by solder instead of using socket when operation current is higher than 6A. Soldering point should be close to the root of the pins. Soldering temperature should be lower than 260 and time shorter than 10 seconds.
     4.Use constant current power supply. Avoid surge current.
     5.Laser diode must be used according to the specifications.
     6.A minimum bend radius should be 300 times greater than the fiber cladding diameter.
     7.Laser diode must work with good cooling.
     8.Operation temperature is 10~30.
     9.Storage: -20~ +70, all pins short-circuit.